Iris Recognition Access Control* Switch System Introduction

Shenzhen Hongshunmeng Co., Ltd. specializes in R&D and production of three-roll gates, intelligent barrier gates, barrier gates, swing gates, and full-height gates, providing electronic ticket management systems, electronic catering systems, access control card swipe systems, and one-card access control systems. The system of intelligent channel programs, intelligent security management systems, smart access control, attendance, consumption, fee management, and ticketing is for communities, exhibitions, conference halls, canteens, hotels, museums, gymnasiums, clubs, subways, stations, docks, schools, prisons, etc. Stations and other places provide civilized and orderly access.

All product shells are made of stainless steel. The internal components of the box are all made of stainless steel or rust-proof and anti-corrosion treatment. They are durable and rust-proof, and have strong anti-destructive power. Smooth operation, no jitter; low noise, low power consumption, energy saving and environmental protection. Welcome to inquire!

introduction

In line with the principle of "strictly enter and rigorously go out," all entrances and exits are authenticated by the first iris identification device before they can pass through the gate. In the event of a fire or other emergency, all access control systems can be fully activated and fully locked using access control management mechanical buttons or software. After the access control system is powered off, all door locks must be manually opened by the police.

According to the actual requirements of the prison management work, the management mode of the AB linkage door is adopted to achieve interlocking interlocking of the two doors and a buffer zone is created between the AB doors.

When the normal state enters the surveillance area, the iris recognizes the opening of the A door, enters the anti-trapping buffer area, and then swipes the card to open the gate, and then opens the B door again through the iris recognition to enter the interior area. When out of the supervision area, after the card is swiped, the center conducts third-party verification. The center checks whether the personnel in the surveillance video meet the exit authority. If there is any authority, the center will open the door through the remote control of the management software to enter the anti-failure buffer area and swipe the card. If the gate is opened, if the card is not jumped from the gate, the mobile detection system will immediately issue an alarm. At the same time, it will link the video surveillance and lock the AB two doors, eliminating the possibility of accidentally passing through the buffer and thinking of a gate. Passing through the A-door is legal only through the buffer.

The identity verification terminal of the system adopts the first identification technology product, the iris biometric identification instrument, which has an identification accuracy of 6-10 times that of the fingerprint. The false recognition rate is less than one thousandth of the fingerprint, and the rejection rate is less than With one-tenth of fingerprints, the average failure rate is less than one-tenth of that of fingerprints, and the recognition speed is 5-10 times that of fingerprints. Therefore, it is currently the most ideal choice.

Basic technical parameters:

1. Misidentification rate: One-point recognition is less than one part in one million, and binocular recognition is less than one-billionth. 2, iris recognition time (from the appropriate location to complete the iris image to the output recognition results) 0.1 seconds, iris recognition time (from the collection of iris images to output recognition results) monocular recognition is less than 1 second, binocular recognition is less than 3 seconds; iris registration time ( From the acquisition of the iris image to the completion of the registration) Monocular registration is less than 3 seconds and registration of both eyes is less than 5 seconds. 3. Register 10,000 iris files and store 100,000 identifications. 4, sound and light guidance non-contact recognition distance 20-50CM. 5, the working environment temperature: -20 °C ~ +60 °C. 6, offline, online use can be hanging or desktop optional.

2. The anti-submarine buffer zone is set up with double-signal detection and iris access control system and video surveillance linkage system respectively, thus forming an organic combination of the access control system and the monitoring system. After the illegal passer touches the detector, it immediately activates the access control system to lock the double door, and at the same time drives the video surveillance alarm so that the staff can see the scene in time. The detector is a combination of infrared and microwave dual detection technology. It is currently the most advanced detection product for small space, double detection, and minimizes the false alarm rate.

3, full-time real-time video, acousto-optic monitoring and tracking, all system illegal behavior can produce visual audible alarm signal, to provide staff with the maximum basic judgment conditions.