ESD anti-static access control system test operation steps

ESD anti-static access control system (esd comprehensive electrostatic test data management access control system) is an advanced product that combines electrostatic testing with electronic access control systems and computerized management software; in many places with anti-static areas (EPA), electrostatic shoes and electrostatic wrist The tests carried by the belt are all carried out in the traditional manual login or supervision method, which is not easy to implement, and even makes mistakes. It is difficult to gain the trust of customers and management. It also forms a great potential loophole caused by electrostatic grounding of personnel; the anti-static access control system is aimed at these Shortcomings, a direct and effective solution is proposed to ensure that when the operators enter the EPA area, they are actually prepared for the electrostatic grounding of the personnel; and can be equipped with three-roller gates, wing gates and other channel gates as control equipment for pedestrian passages . It can provide an orderly and civilized way for entering and exiting personnel to prevent unqualified entry and exit, and quickly control the fall of the pole in an emergency, and organize the evacuation of personnel.

Operation steps of anti-static access control system test
　　 First, wear anti-static clothes, anti-static shoes, anti-static bracelets, anti-static caps and other related anti-static items. Then go to the entrance guard of the anti-static gate to prepare for the test.
　　Wear the static wristband at the entrance and exit check-in place, and then check-in. Then press the test button by hand. When the three PASS lights are all on, the indicator light on the access control panel of the anti-static gate turns green and push the rod in the direction of the arrow to pass.
Preparing for the test work: the test staff must stand on the foot pedal (on) to prepare for the test item, and the feet must stand in the middle of the footprints.
　　 Place the card on the body close to the punching device, and the electrostatic controller will automatically read the information on the card.
　　Push your finger on the test button, watch the required test item displayed on the LCD display, check the name, department, job number or photo and other information. (The test can be adjusted from 0 to 5S for a long time, and the card must be re-swiped to test again if it exceeds 5S).
According to the test items of the card, the system will automatically turn on the gates and test personnel will enter; if the test results are unqualified, check your wrist strap or electrostatic shoes according to the test results. The LCD screen and electrostatic tester will visually display the test results and fail. the reason.

　　 After the test, you can also directly watch the gate traffic indicator. The bright green arrow indicates that the test is successful and the gate has been opened and you can pass.
　　 After the test is completed, the employees view the results and upload them to the computer to save the record report in real time.